Services
Seven trades. One crew.
Framing, board, finish, ceilings, insulation, doors and demolition, priced together and built in the right order by people who talk to each other.
Metal stud framing
Steel stud partitions laid out from the plans: full height to the deck, braced above the grid, soffits, bulkheads and backing.
Read moreDrywall installation
Board hung to the assembly on the drawings: 5/8" Type X, moisture- and mold-resistant board in wet areas, and rated walls built as tested.
Read moreTape, float & finish
Tape, float, skim and sand to the finish level the paint and lighting call for, from Level 1 above the ceiling to Level 5 in a lobby.
Read moreCeiling grid & tile
Suspended ceilings from layout to last tile: 15/16" grid, 2×2 and 2×4 tile, reveal and square edges, and aluminum grid for MRI rooms.
Read moreWall insulation
Batt insulation in interior and exterior walls: R-11 in standard partitions for sound control, and thicker batts where the walls are wider.
Read moreDoors & frames
Door frames and doors set as the walls go up: hollow metal frames, pocket doors, standard and 42-inch openings, labor only or furnished.
Read moreInterior demolition
Selective interior demolition: walls, doors, cabinets and ceilings removed, hauled and swept, so the new build-out starts clean.
Read moreNeed all of it?
Send the drawings. We price every scope on its own line, so you can take the whole package or just the pieces you need.
Request a bidWhy bundle them
Fewer hand-offs, fewer gaps.
On a typical build-out, the framer, the hanger, the finisher, the ceiling installer and the door installer are five companies with five schedules. Every hand-off is a chance for a gap in the scope or a day lost waiting. When one subcontractor carries all of it, the sequence takes care of itself.
- One estimate with every scope on its own line, so you can compare it with separate bids or take pieces out.
- Frames set during framing, not after board, so openings are right the first time.
- Insulation and board together, so nothing gets closed up uninspected or un-insulated.
- Ceilings that match the walls, with wall angle, soffits and bulkheads planned by the same crew.
- Patch-backs included where the estimate says so, instead of a fight about who closes up after the plumber.
- Clean-up as we go, so the painter and flooring installer start on a clear floor.
Where we work best
Commercial interiors, especially medical.
Clinics and medical offices
Exam rooms, procedure rooms, restrooms and imaging suites, built to the wall types and finishes medical work needs.
Offices and tenant build-outs
Second-generation space and first-generation shells, from one suite to a whole floor.
Add-ons and repairs
A new wall, a ceiling repair, a patch after structural work. Small scopes that keep a bigger project moving.
Have plans to price?
Send drawings or a scope sheet. We price framing, board, finish, grid, insulation and doors as one package, line by line.