Ceilings, insulation & sound

Suspended ceilings: grid, tile and what to specify

The suspended ceiling is the biggest single surface in most commercial interiors, and the one everyone sees. Here’s how it goes together, what the choices on the reflected ceiling plan mean, and what to watch for in medical and imaging rooms.

Key takeaways

  • A suspended ceiling is main runners on hanger wires, cross tees between them, and wall angle at the edges.
  • 15/16" grid is the commercial standard. Narrow 9/16" grid looks lighter and costs more.
  • Tile choice is about looks, absorption (NRC), blocking sound between rooms (CAC) and cleanability.
  • MRI scan rooms need non-ferrous ceiling systems such as aluminum grid. The scanner vendor and shield company set the rules.

How it goes together

A suspended ceiling, also called a drop or acoustical ceiling, is a light metal grid hung from the structure on wires, with lay-in panels resting in the openings. The grid is made to an industry standard, ASTM C635, and installed to another, ASTM C636, which sets out the basics: hanger wires of at least 12 gauge, typically no more than 4 feet apart along each main runner, with extra wires at fixtures and wherever the grid is cut.

Parts of a suspended ceiling Left: a plan of a two-by-two suspended ceiling. Main runners run the length of the room four feet apart and hang from wires at four feet on center; four-foot cross tees run between them, and two-foot cross tees split each four-by-four opening into two-by-two openings. Wall angle trims the perimeter. Right: the two common tile edges, square lay-in, which sits flush on the grid, and reveal or tegular, which drops below the grid face. MAIN RUNNER · 4' O.C. 4' CROSS TEE · 2' O.C. 2' CROSS TEE · MIDSPAN HANGER WIRE · 4' O.C. WALL ANGLE AT PERIMETER ONE 2' × 2' TILE SQUARE LAY-INREVEAL (TEGULAR) Tile rests on the grid; faceflush with the tee. Tile edge drops below thegrid for a shadow line.
A 2×2 suspended ceiling in plan. Main runners 4 feet apart on hanger wires, 4-foot cross tees every 2 feet, 2-foot cross tees at midspan, wall angle around the edge.
  • Main runners run the length of the room, typically 4 feet apart, and carry the load to the hanger wires.
  • Cross tees lock into the mains. Four-foot tees make 2×4 openings; adding 2-foot tees splits them into 2×2.
  • Wall angle (or shadow molding for a crisper edge) trims the perimeter and supports the border tiles.
  • Tile drops into the openings, with lights, diffusers, sprinkler heads and speakers coordinated into the layout.

Grid also comes in duty classes, from light to heavy, which describe how much load the mains can carry. Commercial work with lay-in lights and diffusers usually calls for intermediate or heavy duty.

Laying it out

A good ceiling starts on paper. The reflected ceiling plan shows where the grid starts, and a well-drawn plan centers the grid so the border tiles at opposite walls are the same width and at least half a tile wide. Before the first wire goes in, the installer checks that layout against the room as built, the light fixture locations and the sprinkler heads. Ceiling height is set with a laser, and the whole ceiling is leveled as it’s hung.

Grid face: 15/16" or 9/16"

The face of the grid, the part you see, is usually 15/16 of an inch wide. That’s the commercial standard and the most economical. Narrow-face 9/16" grid gives a lighter, more refined look and is common in lobbies and higher-end offices. Specialty systems with slots or reveals in the grid face are available too. Whatever the face, keep it consistent across connected spaces.

Tile: edges, size and performance

ChoiceOptionsWhat it changes
EdgeSquare lay-in; reveal or tegular; angled revealSquare edge sits flush and costs least. Reveal edges drop below the grid for a shadow line and a more finished look.
Size2×2, 2×4, larger formatsPattern and scale. 2×2 reads as more modern; 2×4 uses less grid.
NRCLow to high absorptionHow much echo the room has. High NRC for open offices, waiting rooms and corridors.
CACLow to high attenuationHow much sound passes over walls that stop at the ceiling. Matters for exam and consult rooms.
SurfaceStandard, scrubbable, washable, vinyl-facedCleanability. Clinical, food-service and procedure areas often need washable or vinyl-faced tile.

At our Richmond Ave project, the designer chose Armstrong Dune 2×2 tile with a reveal edge on 15/16" grid. It’s a common combination for medical offices: a fine texture, a crisp shadow line and widely available replacement tiles for the life of the building.

Where ordinary grid won’t do

MRI scan rooms restrict ferromagnetic materials, because the magnet pulls on them and they can affect the image. Ceiling systems inside the scan room are typically non-ferrous, such as all-aluminum grid with suitable non-magnetic hangers and fasteners. At Richmond Ave we installed all-aluminum 15/16" grid where the imaging suite required it. The scanner manufacturer and the RF shield company set the exact requirements, and the ceiling installer should get them in writing before ordering material.

Humid areas such as natatoriums, kitchens and some exterior soffits call for corrosion-resistant grid and humidity-resistant tile. Clean rooms and some procedure rooms use gasketed, sealed systems.

Repairs and changes

Renovations constantly cut into existing ceilings: a new wall, a beam, a duct. The right way is to cut the grid back, install wall angle or new tees on both sides of the new work, and reinstall tile, matching the existing system if it’s still made. That’s exactly how the new stair wall at Richmond Ave was handled.

Common questions

What’s the difference between NRC and CAC?

NRC, the noise reduction coefficient, describes how much sound a tile absorbs, which controls echo inside the room. CAC, the ceiling attenuation class, describes how well the ceiling blocks sound passing up through it and down into the next room. An open office wants high NRC; exam rooms with walls that stop at the ceiling want high CAC too.

Is 2×2 or 2×4 tile better?

Neither is better in general. 2×2 tile gives a finer, more modern grid pattern and is easier to handle; 2×4 uses less grid and can cost less. Match the reflected ceiling plan and any existing ceilings you need to blend with.

Can lights hang from the ceiling grid?

Lay-in fixtures sit in the grid and are clipped to it, and depending on the fixture weight and the code, they may also need their own support wires to the structure. The electrician and the ceiling installer should agree on it before the grid goes up.

Have plans to price?

Send drawings or a scope sheet. We price framing, board, finish, grid, insulation and doors as one package, line by line.

Request a bid