Services · Ceiling grid & tile

Acoustical ceiling grid and tile

Suspended ceilings laid out from the reflected ceiling plan, hung level, and finished with the tile the designer picked. Including the rooms where ordinary steel grid isn’t allowed.

Laid out, hung level, finished clean

A suspended ceiling is one of the most visible things in a commercial interior, and one of the easiest to get slightly wrong. We lay the grid out from the reflected ceiling plan so the border tiles are balanced, hang it on wires to the structure, level it with a laser, and coordinate with the electrician and the HVAC installer so lights, diffusers and sprinkler heads land where they should.

  • 15/16" exposed grid, the commercial standard, and narrow-face grid where the design calls for it
  • 2×2 and 2×4 acoustical tile, square lay-in or reveal (tegular) edge
  • All-aluminum grid for MRI scan rooms and other places where steel can’t go
  • Wall angle, shadow molding and transitions to drywall soffits and bulkheads
  • Demo, repair and reinstall when walls, beams or ductwork go in through an existing ceiling

From the Richmond Ave job

On the Richmond Ave job we installed 15/16" grid with Armstrong Dune 2×2 reveal-edge tile throughout, and an all-aluminum 15/16" grid with the same tile where the imaging suite required non-ferrous materials. Earlier on the same project we cut the existing grid back for a new wall at the stair, installed wall angle on both sides and put the tees and tile back.

Parts of a suspended ceiling Left: a plan of a two-by-two suspended ceiling. Main runners run the length of the room four feet apart and hang from wires at four feet on center; four-foot cross tees run between them, and two-foot cross tees split each four-by-four opening into two-by-two openings. Wall angle trims the perimeter. Right: the two common tile edges, square lay-in, which sits flush on the grid, and reveal or tegular, which drops below the grid face. MAIN RUNNER · 4' O.C. 4' CROSS TEE · 2' O.C. 2' CROSS TEE · MIDSPAN HANGER WIRE · 4' O.C. WALL ANGLE AT PERIMETER ONE 2' × 2' TILE SQUARE LAY-INREVEAL (TEGULAR) Tile rests on the grid; faceflush with the tee. Tile edge drops below thegrid for a shadow line.
How a suspended ceiling goes together. Main runners hang from wires; cross tees make the openings; wall angle finishes the edge. Reveal-edge tile drops below the grid for a crisper look.

Ceiling grid & tile

Common questions

Why would a ceiling need aluminum grid?

Inside an MRI scan room, ferromagnetic materials are restricted because the magnet attracts them and they can affect the image. Aluminum grid is one of the standard non-ferrous options. The scanner vendor and the shielding company set the requirements for each room.

What’s the difference between square-edge and reveal-edge tile?

Square lay-in tile sits flush with the face of the grid. Reveal, or tegular, tile has a stepped edge that drops below the grid, which hides the grid line a little and gives the ceiling more depth. Reveal tile costs a bit more.

Can you replace tile or repair an existing ceiling?

Yes. We cut back and reinstall grid for new walls and structure, replace damaged tile and match existing systems where the product is still made.

Have plans to price?

Send drawings or a scope sheet. We price framing, board, finish, grid, insulation and doors as one package, line by line.

Request a bid