Key takeaways
- 5/8" Type X is the commercial workhorse because most fire-rated wall and ceiling assemblies are tested with it.
- Moisture- and mold-resistant board goes in restrooms, janitor’s closets and around sinks. Showers need a real tile backer.
- A fire rating belongs to the whole assembly, not to the board. Build the listed design exactly.
Type X: the commercial default
Type X gypsum board has a core with glass fibers and other additives that help it hold together longer in a fire. It is defined in ASTM C1396, and it is the board most fire-rated designs call for, typically in 5/8" thickness. A familiar example is the one-hour steel stud partition, built with one layer of 5/8" Type X on each side of the studs, which appears in many listed designs.
Many commercial projects hang 5/8" Type X everywhere, rated wall or not. That keeps one product on the job, avoids mix-ups between rated and unrated walls, and gives a stiffer, flatter wall on steel studs than 1/2" board. At our Richmond Ave project, every wall got 5/8" Type X except the restrooms.
Type C is an enhanced fire-resistant board with more glass fiber and other additives, called for by some ceiling and specialty assemblies. If the design calls for Type C, Type X is not a substitute.
Fire ratings are assemblies
A one-hour or two-hour wall is rated because a specific combination of parts passed a fire test: stud size and gauge, board type, number of layers, screw type and spacing, joint treatment, insulation if any, and how the top of the wall meets the structure. The drawings reference that design, usually by a UL or Gypsum Association number. Building it right means matching every part of it, including:
- The wall running to the deck, with the listed head-of-wall joint where the structure above moves
- Joints taped (often Level 1 is the minimum above the ceiling)
- Penetrations by pipes, ducts and cables sealed with a listed firestop system
- Labels or markings above the ceiling where the code or the fire marshal requires them
Moisture- and mold-resistant board
In restrooms, janitor’s closets, break rooms and around sinks, drawings usually call for moisture-resistant board. Today most of these products are also mold-resistant, rated by laboratory tests such as ASTM D3273. They are easy to spot on site because manufacturers color the face paper. Houston crews often call them by color, like the purple board we hung in the bathrooms at Richmond Ave. Many come in Type X versions, so a rated restroom wall can keep its rating.
Moisture-resistant is not waterproof. For tile in showers, tubs and other areas that get wet every day, the usual base is a cement board or glass-mat tile backer as part of a waterproofed tile system, as the drawings and the tile manufacturer specify.
Other boards you’ll see on commercial drawings
| Board | What it’s for | Typical places |
|---|---|---|
| Abuse- or impact-resistant | Harder face and core that resist dents and punctures (classified under ASTM C1629) | Corridors with carts and stretchers, schools, gyms, back-of-house |
| Glass-mat sheathing | Exterior sheathing behind cladding | Exterior walls, soffits |
| Tile backer (cement or glass-mat) | Substrate for tile in wet areas | Showers, tub surrounds, wet walls |
| Shaftliner | Thick Type X panels for shaft and area separation walls built from one side | Elevator and stair shafts, mechanical chases |
| Lead-lined board | Gypsum board laminated to sheet lead for radiation shielding | X-ray, CT and other imaging rooms, per the physicist’s report |
Avoiding substitution problems
Most board mistakes happen when a product is swapped for convenience: 1/2" board in a wall that needs 5/8", regular board in a rated wall, or moisture-resistant board where the tile system calls for cement board. Our rule is simple: build what the drawings say, and if the drawings don’t say, ask before the board goes up. Swapping it out later costs more than asking.
Common questions
Does Type X drywall make a wall fire-rated?
Not by itself. A fire rating belongs to a tested assembly: the studs, the board type and layers, the fasteners and spacing, the joint treatment and the head-of-wall and penetration details. Type X is the board most of those assemblies use, but the whole wall has to match the listed design.
Can I use moisture-resistant board in a shower?
Generally not. Moisture- and mold-resistant gypsum board is for areas with humidity and occasional splashing. Showers and other wet areas typically call for a cement board or glass-mat tile backer as part of a waterproofed tile system. Follow the drawings and the manufacturer’s instructions.
Is purple drywall the same as green board?
Both are moisture-resistant gypsum boards, colored by the manufacturer so they’re easy to identify. The purple boards many Houston crews use are a moisture- and mold-resistant line; the color is branding, so always check the product data rather than the color.